20W Marking Non-metal CO2 Laser Marking Machine
Product Description
Our CO2 laser marking machine is to use infrared light to achieve marking work on the object, mainly the CO2 gas is charged into the high-pressure tube to produce discharge, so that the gas release laser, laser amplification can form the object marking processing laser beam, so that the material surface to achieve the purpose of marking or engraving.
CO2 laser marking machine is mainly used to mark the material is non-metallic material, through the release of CO2 gas to achieve accurate marking of objects.Equip with high speed scanning vibrator and precise focusing system, so that the whole CO2 laser marking machine marking precision is high, fast;And our laser height can be adjusted up and down at will, it is more convenient to use, you can also change the various sizes of the marking lens, easy to operate.
Share on facebook
Facebook
Share on twitter
Twitter
Share on linkedin
LinkedIn
Share on whatsapp
WhatsApp
Share on email
Email
20W Marking Non-metal CO2 Laser Marking Machine Features
1. CO2 laser marking machine and fiber laser marking machine, have the advantages of high photoelectric conversion efficiency.
2. Desktop type non-metal CO2 laser marking machine adopts human body structure, so that the operator to use more convenient and comfortable, the overall weight is light, but also relatively easy to carry.
3. The wavelength is suitable, so the transmittance is relatively high, the quality of the beam through is high, the line width is narrow, and the work is stable.
4. Can have a wide range of laser output, high precision can achieve the maximum precision range of 10 micron output.
5. With good directivity and very good controllability, the overall output density of the machine is small, the gas density is also small, and the monochromatic frequency is relatively stable.
20W Marking Non-metal CO2 Laser Marking Machine Parameter
Laser power | 20W/30W/50W/100W |
Laser wavelength | 1064nm |
Control software | Ezcad (provided) |
Laser repetition frequency | 10KHZ ~ 50KHZ |
Min tuning Q laser pulse width | 30ns |
Beam divergence angle | <0.3mrad |
Standard marking range | 110*110mm |
Optional engraving range | 150* 150mm/200*200mm |
Engraving depth | ≤0.5mm |
Engraving linear speed | 12000mm/s |
Min. line width | 0.01mm |
Repetition accuracy | ±0.003mm |
Marking format | Graphics, text, bar code, 2D code, date, shift number, batch number, serial number, document link (support the graphic import of any design software) |
Operating system | WINXP Chinese operating interface, support PLT, PCX, DXF, BMP, and other file formats, adopt SHX, TTF fonts |
Power consumption | ≤3KW |
Electrical connection | 220V±22V/50HZ/15A |
Optional parts | Rotary device, Moving table, other customized automation |
Working temperature | 15~30ºC (no dust and required air-conditioner) |
Relative humidity | <80% |
20W Marking Non-metal CO2 Laser Marking Machine Main Parts
The main configuration of CO2 laser marking machine is actually the same as the configuration of fiber laser marking machine, but the laser is lost.The mode is different.
1. Of course, the most important configuration is the laser, CO2 laser marking machine laser is CO2 series, long service life, is generally installed in the shell of the machine, like our table CO2 laser marking machine laser is installed in the following cabinet.
2. Laser power is also very important, it is dedicated to provide power for the laser device, as long as the input voltage, can produce alternating current, to provide sufficient power for the marking machine.
3. Vibrator field mirror scanning system: Vibrator lens is located at the top of the whole machine, which is also used for positioning and punctuation. It is composed of stator, rotor and detection sensor.Our CO2 laser marking machine uses the most matched vibration mirror field mirror scanning system, accurate positioning and punctuation.
4. The computer control system: each marking machine is equipped with a computer, like we this desktop co2 laser marking machine is equipped with a laptop computer, is used to control the laser marking machine, the carrier of notebook computer is used for software installation at the same time, through the field lens and the galvanometer scanning system together to finish marking processing of workpiece.
20W Marking Non-metal CO2 Laser Marking Machine Samples
CO2 laser marking machine is mainly used for marking non-metallic materials, a small part of metal materials can also be marked, but the effect may not be as good as fiber laser marking machine.Like PVC/ rubber, wood, plastic, leather and so on are CO2 laser marking machine often marking materials, many customers choose CO2 laser marking machine is also used to mark these materials.
Widely used in medicine, food and beverage packaging, wooden toothbrush marking and production date, batch number, shift, manufacturer name and logo.
Packing And Shipping
1. About the packaging of CO2 laser marking machine: we use plastic film and anti-collision materials to pack the laser marking machine, and finally seal the box with the secret plywood outside.
2. The shipping agents we cooperate with are all freight forwarders with many years of overseas transportation experience, so as to ensure the safety of the machines during sea transportation.Of course, we can provide not only sea transportation, such as air transportation, express delivery, we can provide, for customers in different countries to choose the most appropriate mode of transportation.
3. Provide considerate after-sales service: after customers get the machine, if you have any questions, you can contact us, we will try our best to solve the problem for customers.
