Full Closed 30w JPT Mopa Fiber Laser Marking Machine

30W JPT Mopa Laser Marking Machine
It can mark metal and non-metal. It can not only mark planar work, but also mark on cylinder by adding some tools, such as bottles, pens and rings by rotary device. Laser marking machine can mark 2D and 3D work
Laser Power 20w/30w/50w/100w
Marking area 110mm*110mm/200*200mm/300*300mm
Laser brand Raycus/JPT
Laser wavelength 1064nm
Optional Rotary device/ double red light positioning
Full Closed Mopa Fiber Laser Marking Machine Features
# EZCAD control system is suitable for W7 / W8 / W10 computer version
# The JPT MOPA pulse duration is long and the quality of the laser beam is high
# Better flexibility (computer programmed, free to mark a variety of graphics, texts and other kinds of information);
# Higher precision, consistent marking quality;
# Long service life, can reach 100,000 hours, and we give a three-year warranty
# Markings are permanent with high abrasion resistance;
# Anti-counterfeiting function. Applicable materials:Gold, silver, copper, aluminum, stainless steel, hard alloy, chrome, titanium and other metals, ceramic, PVC, plastic, epoxy resin, leather and other non-metallic materials.raycus,max,ip
# Little pollution, environmentally friendly
# Lower use-cost, higher speed, higher production efficiency;
30W JPT Laser Marking Machine Technical Parameter
Laser power | 20W/30W/50W/100W |
Laser Wavelength | 1064nm |
Marking Area | 110mm*110mm, optional 175*175mm, 200*200mm, 300*300mm |
Laser repetition frequency | 10KHZ ~ 50KHZ |
Min tuning Q laser pulse width | 30ns |
Beam divergence angle | <0.3mrad |
System Operating Environment | WINDOWS XP/7/8/10 |
Laser source brand | Raycus/Max/JPT |
Engraving depth | ≤0.5mm |
Engraving linear speed | 12000mm/s |
Min. line width | 0.01mm |
Repetition accuracy | ±0.003mm |
Marking format | Graphics, text, bar code, 2D/3D code, date, shift number, batch number, serial number, document link (support the graphic import of any design software) |
Operating system | WINXP Chinese operating interface, support PLT, PCX, DXF, BMP, and other file formats, adopt SHX, TTF fonts |
Power consumption | ≤3KW |
Electrical connection | 220V±22V/50HZ/15A |
Laser unit | Fiber |
Working temperature | 15~30ºC (no dust and required air-conditioner) |
Relative humidity | <80% |
2D Fiber Laser Marking Machine Main Parts
1.Laser controller card:Laser control card enables real-time control ofscan system and lasers over a standard USB host interface. Customers can integrate completemachinery easily over the laser control card dueto its compactness and I/O capabilities. Fast res-ponse times and short execution cycle times.make the EzCad Card perfectly suitable for highperformance applications. It can load marking filevia a removable MMC memory card.
2.Raycus laser source:Raycus’ 10~100W Q-switched pulsed fiber lasersfeature high peak power, high pulse energy andoptional output beam size. They are widely usedin marking, precision rilling and engraving on non-metal and high reflection metals, such as gold,silver, aluminum and stainless steel etc..IPG,JPT Mopa,MAX laser source could beconfigured as per request.
3.lens:it have very good laser beam transparent rate, less laser beam loss,longer lifetime than other brand lens.110*110/1 50*150/175*175/200*200/300*300MM lens for optional.
4.Galvanometer scanner and beam:expander to form a two dimensions scanning system. The scan lens is optimized to providea flat field image with diffraction-limited spotsize in micron scale over the entire scan field.

Laser Marking Machine Marking Samples
Can engrave metal and a few non-metallic materials.More suitable for some requirements of fine, high precision product processing.
Used in electronic components, integrated circuits (IC), electrical appliances, mobile phone communications, hardware products, tool accessories, precision instruments, glasses clocks and watches, jewelry, auto parts, plastic keys, building materials, PVC pipe, medical equipment and other industries.

Packing and Shipping
1. All the spare parts of the machine were covered by some soft materials,mainly using pearl wool. Avoiding all damages that could happen in the delivery process.Then we’ll covered plastic wrap out it tightly,make sure intact of the covered soft materials,also avoiding Waterproof and rust proof.
2.The outmost is wooden case with fixed formwork.
3.The bottom of the wooden case has firm iron jack,convenient to Handling and transport.
4. Our wooden case is after fumigation treatment.Needn’t timber inspection,saving shipping time.
5. We will check and test machine before delivery clearly, we also will take picture and working videos to you before delivery, you can use it directly after machine arrived.
