Marking Wood Co2 Laser Marking Machine
The marking wood CO2 laser marking machine is equipped with high-speed scanning vibrator and beam expanding focusing system, marking accuracy is high and speed is fast;The height can be adjusted up and down, easy to use, can change the lens of all kinds of marking format;Long continuous working time, clear and beautiful marking, powerful software function, can be marked by running number, flight marking;Fixed laser marking design, simple operation, perfect upper and lower ventilation system, environmental protection and safety work.
Marking Wood Co2 Laser Marking Machine Advantages
1. Large output power and high energy conversion efficiency.The general closed tube CO2 laser can have a continuous output power of tens of watts, far more than other gas lasers;Transverse flow type electrically excited C02 laser can have a continuous output of several hundred thousand watts.The energy conversion efficiency of CO2 lasers can reach 30 to 40 percent, which is also higher than that of ordinary gas lasers.
2. Carbon dioxide laser marking machine uses the vibration of CO2 molecules a transition between rotational energy levels, there are relatively rich spectral lines, in the 10μm near the laser output of ten lines.In recent years, high pressure CO2 lasers have been discovered, which can even achieve continuous tunable output from 9μm to 10μm.
3. The output band of carbon dioxide laser marking machine is just the atmospheric window (that is, the atmospheric transparency of this wavelength is higher).In addition, it has the advantages of high optical quality, good coherence, line width and stable operation of the output beam.Therefore, it has many applications in national economy and national defense, such as processing (welding, cutting, drilling, etc.), communications, radar, chemical analysis, laser induced chemical reaction, surgery and other aspects.
Marking Wood Co2 Laser Marking Machine Parameter
|Laser repetition frequency
|10KHZ ~ 50KHZ
|Min tuning Q laser pulse width
|Beam divergence angle
|Standard marking range
|Optional engraving range
|Engraving linear speed
|Min. line width
|Graphics, text, bar code, 2D code, date, shift number, batch number, serial number, document link (support the graphic import of any design software)
|WINXP Chinese operating interface, support PLT, PCX, DXF, BMP, and other file formats, adopt SHX, TTF fonts
|Rotary device, Moving table, other customized automation
|15~30ºC (no dust and required air-conditioner)
Marking Wood Co2 Laser Marking Machine Parts
For this machine, the most important components are the sino-Galvonameters, Lens, control board card and software.Among them, the lens can control the working range.For the laser source, It’s main JPT, Raycus, MAX brand. Optional part is the rotation device – this can be used for marking rings
Marking Wood CO2 Laser Marking Machine Samples
Marking wood co2 laser marking machine widely used in glasses, buttons, plastic, signs, packaging, leather, cloth, ceramics, glass, crystal, rubber, electrical appliances, craft products, wood and bamboo products and other industries