Blog
Analysis of common faults and solutions of fiber laser welding machine
Analysis of common faults and solutions of fiber laser welding machine Common faults 1. Cracks appear during welding of laser welding machine Cause analysis and solution: keep the cleanliness of the workpiece; when the workpiece matching gap is too large or there are burrs, the machining accuracy of the workpiece should be improved; the cooling speed
Three-in-one | New handheld laser cutting, cleaning and welding machine, the cleaning index is almost invincible
Have you seen a laser cleaning machine, laser welder, and laser cutter in one unit? Cutting, welding and cleaning are often closely linked up and down processes in metal processing operations. The traditional operation method often requires three different operating equipment to carry out the three processes, not only the purchase cost is high and the
How does the fiber laser cutting machine cut the laminated sheet
How does the fiber laser cutting machine cut the laminated sheet In the production of the whole metal plate, in order to ensure the smoothness of the metal surface, many metal plates will be covered with a layer of film after production. . Metal material lamination is a processing technology in which plastic film and metal
The difference and application advantages of MOPA laser and Q-switched laser
In recent years, domestic fiber laser marking technology has developed rapidly, and it has been widely used in electronic 3C products, machinery, food, packaging and other fields. Compared with traditional marking technology, laser marking technology has more advantages not only in material loss, but also in marking effect. In order to obtain a more beautiful marking
The reason why the laser cutting machine cuts the total black edge of carbon steel
The reason why the laser cutting machine cuts the total black edge of carbon steel In fact, the reason why the laser cutting machine cuts the total black edge of carbon steel is that a lot of heat is released during cutting. Because the thermal conductivity of metal is relatively good, under normal circumstances, the heat
What is the difference between Top-hat beam and Gaussian beam?
Lasers beam are generally Gaussian beams, that is, the beam intensity presents a Gaussian distribution in space. Such a beam has a very high intermediate intensity and gradually decreases along the Gaussian profile. In practical applications, not only Gaussian beams are often required, but also laser beams have specific requirements for specific application requirements. For example: