Laser engraving, laser cutting machine, laser welding machine, laser marking machine,JNCTLASER


Laser cleaning machine for wood

Table of Contents

Laser cleaning is an effective and safe way to clean metal as well as non-metal surfaces. It quickly removes rust and other contaminants without damaging surfaces. Moreover, this effective process also improves surface adhesion with laser texturing. It is a safe and efficient procedure to clean metal and non-metal surfaces because of the high-energy beam particles are vaporized and removed from the surface.

Laser cleaning machines help to remove paint, oxide, rust, and other contaminants from targeted surfaces. This process is also good for many other processes, such as mold cleaning, oxide removal, rust removal, and surface preparation. The laser cleaning process does not cause pollution to the environment like traditional cleaning processes such as sandblasting; this feature has made it popular in the past few years.

Laser cleaning machine are the newest development with many advantages for cleaning wood as well. They quickly clean wood without burning or damaging it.

Can laser cleaner be used on wood?

Traditionally wood cleaning was a great challenge. Even finely-tuned lasers with expert operators will need help consistently cleaning wood surfaces without singing or otherwise damaging the wood sublayers.

However, presently Pulse laser cleaning machine is a new trend in wood cleaning without any harm to the wood base.

The pulse Laser cleaning machine is a true revolution in the deep cleaning of wood. The machine uses a process known as ablation, which allows the removal of unwanted material from the wood surface by irradiating it with a laser beam. By absorbing the laser beam’s energy, the target material heats up very quickly, thus evaporating all the impurities.

However, it is important to know that if the surface below does not absorb energy, it remains intact. By manipulating the laser flux, its wavelength and the length of its pulse, the amount of material that is removed by a single laser pulse can be controlled with extreme precision. Make laser cleaning equally suitable for fast and deep rust removal as it is for removing only a thin layer of paint without damaging the base coat. It is a fast, safe process without contact and can work layer by layer.

What is the cost of a laser cleaning machine?

Presently the cost of a laser cleaning machine is getting lower with the development of laser technology. You will find a 50 W portable laser cleaning machine only at 3800 USD.

Pulse laser cleaning machine cost:

The cost of a 50 W pulsed cleaning machine starts from 3800USD, and there are 100 W pulsed laser cleaner, 200 W pulse laser cleaner, 300 W pulsed laser remover, and 500 W laser cleaning machines available at the cost of 9000 USD – 50000 USD. However, a high-powered pulsed laser cleaning machine of 1000 W is more expensive.

CW laser cleaning machine cost:

The cost of a 1000 W CW laser cleaning machine starts anywhere from 5500 USD, and there are 1500 W CW laser cleanser and 2000 W laser cleaning machines available for around 6000 USD – 8000 USD.

However, a pulsed laser cleaning machine is getting more popular than a CW laser cleaning machine, but in general, the CW laser cleaning machine is cheaper than a pulsed laser cleaning machine.

Well, laser cleaning offers high precision and reproducibility, which saves enormous costs in industrial series production. However, buying a laser cleaning machine is only a one-time investment, making it much cheaper than traditional cleaning processes.

In addition, the running costs of laser machines are also significantly lower because of their low energy consumption (a few kilowatt hours) and moderate maintenance requirements. Significant savings in component unit costs can thus be achieved, especially with large part quantities and fully automatic processes.

Does the laser cleaning machine work?

Yes, the laser cleaning process works great! It effectively cleans metal and non-metal surfaces. So buy a laser cleaning machine without hesitating to spend money because it is only a one-time cost.

Cleaning wood with a laser is safe, effective, and superior to many traditional cleaning processes.

A laser cleaning machine completes the cleaning process of wood without damaging it. Plus, it does not cause pollution to the environment. Usually, the waste produces in the form of solid powder during the process, which can be collected easily.

Advantages of Laser cleaning machine for wood:

Laser cleaning is highly beneficial as it provides high-speed cleaning and surface preparation in virtually all industries. This low-maintenance, easily automated process is good for removing oil and grease and stripping paint or coatings from wood.

Some of the outstanding advantages of laser cleaning machines for wood include the following;

No waste, no cleanup

Unlike traditional cleaning processes, in laser cleaning, there is no need to dispose of removed material. When the cleaning process is completed, there is very little residue (usually in the form of powder), which can be collected using a low-suction extraction system.

Cleans safely

The laser cleaning process completes the cleaning process safely. However, laser protective glasses are the only equipment that should be worn before the process, which is necessary for anyone approaching the laser cleaning site. The operators do not need to wear special suits, gloves, or any other equipment, which can also save money.

Money saving

However, the purchase price of a laser cleaning machine is just an investment; once bought, the machine can be used for an extended period of time without worrying about buying another one. Plus, the laser cleaning machine requires very low to no maintenance, and operating cost is also very low, which can save you lots of money. There is only a need to clean or replace the lenses regularly in later periods. This advantage makes it favourable for individuals and companies.

Non-abrasive

No chemicals are used during the laser cleaning method for wood, so it removes impurities from the surface of the wood without touching the underlying material. Plus, no thermal or chemical strain is placed on the object, which results in contact-free and non-abrasive cleaning.

Environmentally friendly

While cleaning wood, a pulse laser cleaning machine does not use harmful products that can harm the environment, such as solvents, toxic chemicals, or acids. It reduces the risk of contamination and exposure to harmful materials that can be dangerous to employees.

No damage

Cleaning the wood can be a difficult process as there are more chances of its burning or damaging. However, the laser cleaning machine completes its task without damaging the wood. This is because laser cleaning takes a very short time to complete; this short period does not heat the wood surface and causes no damage to the substrate.

Very low noise is produced during the whole process, and all residues can be recycled. Also, the pollutant particles and gas that releases during the cleaning process can be collected and purified by the portable exhaust fan to avoid environmental pollution.

What can you clean with a laser cleaning machine?

Well, almost everything! From metal to non-metal, if your material is covered with contaminants, you can use a laser cleaning process to clean it. The contaminants can include dust, rust, grease, mold, oil, oxide, or others. Laser technology suits best for removing unwanted impurities from any material. It does so by sending laser beams to targeted areas.

How does laser clean wood?

Cleaning wood with a laser is an easy and effective procedure. The laser cleaning machine cleans the wood surface by sending nanosecond-length pulses of laser light towards a surface. When these laser pulses interact with contaminants on the wood surface, the contaminants or coating particles turn into a gas, or sometimes the pressure of the interaction cause particles to free from the surface.

Cleaning wood with laser is an environmentally-friendly process that doesn’t produce additional waste. Compared to other cleaning processes, it is safer for operators as well as for employees. Plus, it’s a non-damaging process to clean the surface and cleans the wood without burning it. Because of its efficiency, it is also being used in a number of other applications.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top