High precision fiber laser cutting machine advantages:
1. Because no contact processing, and fiber laser cutting machine laser beam energy and moving speed are adjustable, so you can complete a variety of processing.
2. The rich variety of processing materials is one of the advantages of fiber laser cutting machine, can be used to process a variety of metals, non-metals, especially can process high hardness, high brittleness and high melting point of the data.
3. In the process of processing without “tool” wear, no “cutting force” sensitized to the workpiece..
4. The heat affected zone of the workpiece is small, the thermal deformation of the workpiece is small, and the subsequent processing quantity is small.
5. All kinds of processing can be stopped by the transparent medium on the workpiece in the closed container.
6. Easy to guide, through the focus can complete a variety of target transformation, easy to cooperate with the numerical control system, about the complex workpiece stop processing, is a very sensitive cutting processing method.
7. High level of initiative, can be fully closed processing, no pollution, low noise, greatly improve the task of the operator.
8. The system itself is a set of computer system, can the convenient arrangement, modifying, suitable for characteristics of processing, especially in some complex outline appearance of sheet metal parts, batch quantity larger, short product life cycle, from the skill, economic cost and time to measure Angle, making mould is not cost-effective, laser cutting, especially an advantage.
9. The energy density of processing is very large, the influence time is short, the heat affected zone is small, the thermal deformation is small, the thermal stress is small, coupled with the laser for the non-mechanical contact processing, the workpiece has no mechanical stress influence, suitable for fine processing.
10. High energy density is enough to melt any metal, especially suitable for processing some of the high hardness, high brittleness, high melting point of the other process is difficult to process materials.
